Eizo ColorEdge CX-241 Leave a comment

Built-In Sensor for Simplified Maintenance

Built-in Correction Sensor Automatically Maintains Your Settings

timerThe CX271 is equipped with a built-in correction sensor housed within the front upper bezel. This sensor records your adjustment results, and maintains the white point and brightness values by automatically readjusting the settings at specific intervals that you determine. Even if the monitor is switched off or not connected to a computer, it will stick to its preset schedule and self correct.

What’s New with the ColorEdge CX241

Reproduces 99% of the Adobe RGB Color Space

colorgamutAn IPS panel with a wide color gamut reproduces 99% of the Adobe RGB color space so images shot in RAW can be converted to Adobe RGB or images shot in Adobe RGB will be displayed correctly. The colors seen in photos of vibrant blue skies and lush green forests will be reproduced faithfully. The wide color gamut also ensures that the monitor reproduces almost the entire ISO-coated and US web-coated CMYK color spaces used in printing as well as 93% of the DCI used in post production.

Features for Creative Work

Uniformity from Corner to Corner

uniformity.gif
Delta-E ab distribution across the screen (gray level 128 measured)

Fluctuations in brightness and chromaticity on different parts of the screen are a common trait of LCD monitors. To counteract this, the monitor incorporates EIZO’s patented digital uniformity equalizer (DUE) technology to ensure a Delta-E difference of 3 or less across the screen when the monitor leaves the factory. DUE also counterbalances the influences that a fluctuating ambient temperature may have on color temperature and brightness to ensure stable image display.

Individually Adjusted at the Factory

The gamma level for each ColorEdge monitor is adjusted at the factory. This is accomplished by measuring the R, G, and B gamma values from 0 – 255, then using the monitor’s 16-bit look-up table (LUT) to select the 256 most appropriate tones to achieve the desired value

gamma

Stable Display within Seven Minutes of Startup

From the time it is turned on it typically takes 30 minutes or longer for a monitor’s brightness, chromaticity, and tone characteristics to stabilize. EIZO has shortened this warm-up time by more than 75% to a mere 7 minutes. For confirming your work in a photo studio or taking your monitor with you on location, you can get to work right away.

drift correction

10-Bit Simultaneous Display

Using the DisplayPort input, the monitor offers 10-bit simultaneous color display* from a 16-bit look-up table which means it can show more than one billion colors simultaneously. This is 64 times as many colors as you get with 8-bit display which results in even smoother color gradations and reduced Delta-E between two adjacent colors.
*A graphics board and software which support 10-bit output are also necessary for 10-bit display.

10-bit

Automatic Readjustment of Color Mode Preset with Internal Sensor

With the built-in SelfCorrection sensor, you can maintain the monitor at one of the color mode presets without using any software. When the monitor is calibrated at the EIZO factory, the SelfCorrection sensor measure’s the LCD panel’s white point and stores it to the monitor. When readjusting, the monitor compares the stored value for white point against the current value and corrects any difference.

selfcorrection.jpg
Self-correct to a preset mode by pressing a button on the front of the monitor

Excellent Tone Display in the Dark

When viewing the screen from an angle in a dimly lit room, dark tones typically appear washed out due to the display characteristics of LCD backlights. The monitor maintains a high contrast ratio even from an angle which allows the dark tones to retain their depth.

dark area

LED Buttons and On-Screen Button Guide

For dimly lit work environments like post production studios, the monitor comes with backlit control buttons and an on-screen button guide to indicate what each button is for.

ip conversionI/P Conversion

The HDMI input supports I/P (interlace/progressive) conversion for converting the interlace signals from TV and video into progressive signals for flicker-free display.
onlinebuttonfin

Leave a Reply

Your email address will not be published. Required fields are marked *